Door CloserUpdated 3 months ago

Please refer to the short video below:

Below follows an AI-generated step-by-step guide

Preparation

1. Choose Installation Location: Decide whether to install the door closer inside or outside the weather seal.
2. Clean the Area: Use the provided wipe to thoroughly clean the target area on the door. This removes any manufacturing residue that could interfere with the adhesive.

Adhesion Promoter Application

1. Apply Adhesion Promoter: Use the petroleum-based adhesion promoter pad to apply a thin layer to the cleaned area.
2. Wear Gloves (Optional): If you have sensitive skin, wear latex gloves to protect your hands.
3. Allow Curing Time: Let the adhesion promoter cure for at least 5 minutes and no more than 20 minutes before proceeding.

Door Closer Installation

1. Dry Fit: Perform a dry fit of the door closer to determine the optimal positioning.
2. Remove Backing: Peel off the red film backing from the door closer.
3. Apply and Press: Align the door closer with the target area and firmly press it into place for about 20 seconds.

Safety Precautions

• Adult Supervision: Keep children away from the door closers as they can pose a finger-trapping hazard.
• Caution with Guests: Advise guests to exercise caution when using the doors.

Post-Installation

• Immediate Use: You can drive your Cybertruck immediately after installation.
• Adhesive Curing: Allow at least one day for the adhesive to fully cure before using the door closers.

step-by-step guide.